Filesystems are responsible for organizing how data is stored and recovered. One way or another, with time, filesystem may become corrupted and certain parts of it may not be accessible. If your filesystem develops such inconsistency it is recommend to verify its integrity.
This can be completed via system utility called fsck (file system consistency check). This check can be done automatically during boot time or ran manually.
In this article, we are going to review the fsck utility and its usage to help you repair disk errors.
When to Use fsck in Linux
There are different scenarios when you will want to run fsck. Here are few examples:
- The system fails to boot.
- Files on the system become corrupt (often you may see input/output error).
- Attached drive (including flash drives/SD cards) is not working as expected.
fsck Available options
Fsck command needs to be run with superuser privileges or root. You can use it with different arguments. Their usage depend on your specific case. Below you will see some of the more important options:
-A– Used for checking all filesystems. The list is taken from
-C– Show progress bar.
-l– Locks the device to guarantee no other program will try to use the partition during the check.
-M– Do not check mounted filesystems.
-N– Only show what would be done – no actual changes are made.
-P– If you want to check filesystems in parallel, including root.
-R– Do not check root filesystem. This is useful only with ‘
-r– Provide statistics for each device that is being checked.
-T– Does not show the title.
-t– Exclusively specify the filesystem types to be checked. Types can be comma separated list.
-V– Provide description what is being done.
How to Run fsck to Repair Linux File System Errors
In order to run fsck, you will need to ensure that the partition you are going to check is not mounted. For the purpose of this article, I will use my second drive
/dev/sdb mounted in
Here is what happens if I try to run fsck when the partition is mounted.
# fsck /dev/sdb
Run fsck on Mounted Partition
To avoid this unmount the partition using.
# umount /dev/sdb
Then fsck can be safely ran with.
# fsck /dev/sdb
Run fsck on Linux Partition
Understanding fsck exit codes
After running fsck, it will return an exit code. These cods can be seen in fsck’s manual by running:
# man fsck 0 No errors 1 Filesystem errors corrected 2 System should be rebooted 4 Filesystem errors left uncorrected 8 Operational error 16 Usage or syntax error 32 Checking canceled by user request 128 Shared-library error
Repair Linux Filesystem Errors
Sometimes more than one error can be found on a filesystem. In such cases you may want fsck to automatically attempt to correct the errors. This can be done with:
# fsck -y /dev/sdb
-y flag, automatically
“yes” to any prompts from fsck to correct an error.
Similarly, you can ran the same on all filesystems (without root):
$ fsck -AR -y
How to Run fsck on Linux Root Partition
In some cases, you may need to run fsck on the root partition of your system. Since you cannot run fsck while the partition is mounted, you can try one of these options:
- Force fsck upon system boot
- Run fsck in rescue mode
We will review both situations.
Force fsck Upon System Boot
This is relatively easy to complete, the only thing you need to do is create a file called forcefsck in the root partition of your system. Use the following command:
# touch /forcefsck
Then you can simply force or schedule a reboot of your system. During the next bootup, the fsck will be performed. If downtime is critical, it is recommended to plan this carefully, since if there are many used inodes on your system, fsck may take some extra time.
After your system boots, check if the file still exists:
# ls /forcefsck
If it does, you may want to remove it in order to avoid fsck on every system boot.
Run fsck in Rescue Mode
Running fsck in rescue mode requires few more steps. First prepare your system for reboot. Stop any critical services like MySQL/MariaDB etc and then type.
During the boot, hold down the
shift key so that the grub menu is shown. Select the “Advanced options”.
Grub Advance Options
Then choose “Recovery mode”.
Select Linux Recovery Mode
In the next menu select “fsck”.
Select fsck Utility
You will be asked if you wish to have your
/ filesystem remounted. Select
Confirm Root Filesystem
You should see something similar to this.
Running fsck Filesystem Check
You can then resume to normal boot, by selecting “Resume”.
Select Normal Boot
In this tutorial you learned how to use fsck and run consistency checks on different Linux filesystem. If you have any questions about fsck, please do not hesitate to submit them in the comment section below.